Recognition and Evaluation System for Strip Flatness on 2030 mm Cold Tandem Mills

DAI Jiangbo; WU Wenbin; ZHANG Qingdong; WANG Junfei; WANG Hui

doi:10.13374/j.issn1001-053x.2003.06.001

Volume 25 Issue 6

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2003 > 25(6): 572-574,583

DAI Jiangbo, WU Wenbin, ZHANG Qingdong, WANG Junfei, WANG Hui. Recognition and Evaluation System for Strip Flatness on 2030 mm Cold Tandem Mills[J]. Chinese Journal of Engineering, 2003, 25(6): 572-574,583. doi: 10.13374/j.issn1001-053x.2003.06.001

Citation:

DAI Jiangbo, WU Wenbin, ZHANG Qingdong, WANG Junfei, WANG Hui. Recognition and Evaluation System for Strip Flatness on 2030 mm Cold Tandem Mills[J]. Chinese Journal of Engineering, 2003, 25(6): 572-574,583. doi: 10.13374/j.issn1001-053x.2003.06.001

Citation:

PDF( 459 KB)

Recognition and Evaluation System for Strip Flatness on 2030 mm Cold Tandem Mills

doi: 10.13374/j.issn1001-053x.2003.06.001

1. Mechanical Engineering School, University Science and Technology Beijing, Beijing 100083, China;
2. Baosteel Group Co, Shanghai 200941, China;
3. Chinese People's Public Security University, Beijing 100083, China

Received Date: 2002-12-30
Available Online: 2021-08-17

Abstract

Abstract

In order to accomplish the quantitative evaluation of strip profile, a flatness recognition and evaluation system was proposed, which combines a pattern recognition model based on the fuzzy classification principle and a flatness evaluation model by multi-grade statistics. This system was tested by the data measured from 2030 mm cold tandem mills and a good stage-by-stage result was achieved.
- cold-rolled strip,
- flatness,
- recognition,
- evaluation