小方坯連鑄低碳低硅鋁鎮靜鋼可澆性

<listing id="b1vrb"><cite id="b1vrb"></cite></listing>

<var id="b1vrb"></var>

<var id="b1vrb"></var>

<var id="b1vrb"><video id="b1vrb"><thead id="b1vrb"></thead></video></var>

<var id="b1vrb"><strike id="b1vrb"><listing id="b1vrb"></listing></strike></var>

<cite id="b1vrb"></cite>

<thead id="b1vrb"></thead><menuitem id="b1vrb"></menuitem>

<var id="b1vrb"></var>

<cite id="b1vrb"><strike id="b1vrb"><listing id="b1vrb"></listing></strike></cite>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

小方坯連鑄低碳低硅鋁鎮靜鋼可澆性

劉學華, 韓傳基, 蔡開科, 宋超, 茆勇, 孫維, 張建平

文章導航 > 工程科學學報 > 2005 > 27(4): 431-435

劉學華, 韓傳基, 蔡開科, 宋超, 茆勇, 孫維, 張建平. 小方坯連鑄低碳低硅鋁鎮靜鋼可澆性[J]. 工程科學學報, 2005, 27(4): 431-435. doi: 10.13374/j.issn1001-053x.2005.04.011

引用本文:

劉學華, 韓傳基, 蔡開科, 宋超, 茆勇, 孫維, 張建平. 小方坯連鑄低碳低硅鋁鎮靜鋼可澆性[J]. 工程科學學報, 2005, 27(4): 431-435. doi: 10.13374/j.issn1001-053x.2005.04.011

LIU Xuehua, HAN Chuanji, CAI Kaike, SONG Chao, MAO Yong, SUN Wei, ZHANG Jianping. Castability of billet continuous casting for low-carbon low-silicon Al-killed steel[J]. Chinese Journal of Engineering, 2005, 27(4): 431-435. doi: 10.13374/j.issn1001-053x.2005.04.011

Citation:

LIU Xuehua, HAN Chuanji, CAI Kaike, SONG Chao, MAO Yong, SUN Wei, ZHANG Jianping. Castability of billet continuous casting for low-carbon low-silicon Al-killed steel[J]. Chinese Journal of Engineering, 2005, 27(4): 431-435. doi: 10.13374/j.issn1001-053x.2005.04.011

劉學華, 韓傳基, 蔡開科, 宋超, 茆勇, 孫維, 張建平. 小方坯連鑄低碳低硅鋁鎮靜鋼可澆性[J]. 工程科學學報, 2005, 27(4): 431-435. doi: 10.13374/j.issn1001-053x.2005.04.011

引用本文:

劉學華, 韓傳基, 蔡開科, 宋超, 茆勇, 孫維, 張建平. 小方坯連鑄低碳低硅鋁鎮靜鋼可澆性[J]. 工程科學學報, 2005, 27(4): 431-435. doi: 10.13374/j.issn1001-053x.2005.04.011

LIU Xuehua, HAN Chuanji, CAI Kaike, SONG Chao, MAO Yong, SUN Wei, ZHANG Jianping. Castability of billet continuous casting for low-carbon low-silicon Al-killed steel[J]. Chinese Journal of Engineering, 2005, 27(4): 431-435. doi: 10.13374/j.issn1001-053x.2005.04.011

Citation:

LIU Xuehua, HAN Chuanji, CAI Kaike, SONG Chao, MAO Yong, SUN Wei, ZHANG Jianping. Castability of billet continuous casting for low-carbon low-silicon Al-killed steel[J]. Chinese Journal of Engineering, 2005, 27(4): 431-435. doi: 10.13374/j.issn1001-053x.2005.04.011

小方坯連鑄低碳低硅鋁鎮靜鋼可澆性

doi: 10.13374/j.issn1001-053x.2005.04.011

1. 北京科技大學冶金與生態工程學院, 北京 100083;
2. 馬鞍山鋼鐵股份有限公司技術中心, 馬鞍山 243000

作者簡介:
劉學華(1972-),男,工程師,碩士

中圖分類號: TF761⁺.2;TF777.3
計量
- 文章訪問數: 193
- HTML全文瀏覽量: 59
- PDF下載量: 13
- 被引次數: 0
出版歷程
- 收稿日期: 2004-04-12
- 修回日期: 2005-01-12
- 網絡出版日期: 2021-08-17

Castability of billet continuous casting for low-carbon low-silicon Al-killed steel

1. Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China;
2. Technical Center of Ma'anshan Iron and Steel Co., Anhui 24300, China

摘要: 在分析水口堵塞的基礎上,結合馬鋼三煉鋼生產實際,采用正交實驗法研究了鈣處理的喂線速度、喂線量和中間包水口內徑對140mm×140mm小方坯連鑄低碳低硅高酸溶鋁鋼水口堵塞的影響.結果表明,提高喂線速度、加大喂線量和增加水口內徑可避免水口的堵塞.采用以上工藝,連澆爐數達8~10爐,且鑄坯內部和表面質量良好.
- 小方坯連鑄 /
- 鋁鎮靜鋼 /
- 可澆性 /
- 正交實驗
Abstract: On the basis of analyzing nozzle clogging, the effects of feeding speed, the amount of Ca-Fe cored wire during Ca-treatment and nozzle diameter on the castablity of billet continuous casting for low-carbon low-silicon Al-killed steel were studied by an orthogonal test in line with the on-site condition of No.3 Steelmaking Shop of Ma-Steel, China. The results showed that increasing the feeding speed, the amount of Ca-Fe cored wire and the diameter of the tundish nozzle can prevent blockage. After adopting these parameters proposed, 8-10 heats could be cast in sequence, and the surface quality and internal quality of the billets are satisfactory.
- billet continuous casting /
- Al-killed steel /
- castability /
- orthogonal test

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 193
HTML全文瀏覽量: 59
PDF下載量: 13
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

青青草原综合久久大伊人精品