Application of mold electromagnetic stirring in continuous casting of middle billet

CHEN Jianguo; JIANG Guoli; PANG Yonggang

doi:10.13374/j.issn1001-053x.2007.s1.016

Volume 29 Issue S1

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2007 > 29(S1): 142-145

CHEN Jianguo, JIANG Guoli, PANG Yonggang. Application of mold electromagnetic stirring in continuous casting of middle billet[J]. Chinese Journal of Engineering, 2007, 29(S1): 142-145. doi: 10.13374/j.issn1001-053x.2007.s1.016

Citation:

CHEN Jianguo, JIANG Guoli, PANG Yonggang. Application of mold electromagnetic stirring in continuous casting of middle billet[J]. Chinese Journal of Engineering, 2007, 29(S1): 142-145. doi: 10.13374/j.issn1001-053x.2007.s1.016

Citation:

PDF( 236 KB)

Application of mold electromagnetic stirring in continuous casting of middle billet

doi: 10.13374/j.issn1001-053x.2007.s1.016

1. Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China;
2. Fujian Sansteel Co. Ltd., Sanming 365000, China;
3. Fushun Carbon Black Co. Ltd., Fushun 113001, China

Received Date: 2007-03-01
Rev Recd Date: 2007-05-01

Available Online: 2021-08-16

Abstract

Abstract

The application of mold electromagnetic stirring in continuous casting of middle billet in the Steel Work of Sanming Iron & Steel in Fujian Province was introduced. The optimization of the operation pa-rameters of M-EMS has achieved good metallurgical results, such as decreasing the carbon segregation and pre-venting the central porosity. Those measurements are very useful in improving the quality of products. It is pro-posed that final electromagnetic stirring should be used in the end of liquid core.
- continuous casting,
- electromagnetic stirring,
- magnetic induction