NC Machining of Roller of Skew Rolling and Error Analysis

WANG Baoyu; ZHANG Kangsheng; LIU Jinping; HU Zhenghuan

doi:10.13374/j.issn1001-053x.2001.02.016

Volume 23 Issue 2

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2001 > 23(2): 152-154

WANG Baoyu, ZHANG Kangsheng, LIU Jinping, HU Zhenghuan. NC Machining of Roller of Skew Rolling and Error Analysis[J]. Chinese Journal of Engineering, 2001, 23(2): 152-154. doi: 10.13374/j.issn1001-053x.2001.02.016

Citation:

WANG Baoyu, ZHANG Kangsheng, LIU Jinping, HU Zhenghuan. NC Machining of Roller of Skew Rolling and Error Analysis[J]. Chinese Journal of Engineering, 2001, 23(2): 152-154. doi: 10.13374/j.issn1001-053x.2001.02.016

Citation:

PDF( 359 KB)

NC Machining of Roller of Skew Rolling and Error Analysis

doi: 10.13374/j.issn1001-053x.2001.02.016

Mechanical Engineering of灶School, UST Beijing, Beijing, 100083 China

Received Date: 2000-09-07

Abstract

Abstract

Based on the analysis of process of machining of roller of skew rolling, the equations of curve surface of roller have been deduced out. The theoretic curve surface can be machined by 4 axles control NC lathe. The method of the roller machining has been presented. The error formula has been deduced.
- skew rolling,
- roller,
- NC machining,
- error analysis