Influence of Heat Treatment Process on Shape Memory Effect in Fe-Mn-Si Alloy

Wang Sigen; Wang Xu; Hua Lixian; Zhang Jianfu; Yang Yongquan

doi:10.13374/j.issn1001-053x.1997.01.021

Volume 19 Issue 1

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1997 > 19(1): 105-108

Wang Sigen, Wang Xu, Hua Lixian, Zhang Jianfu, Yang Yongquan. Influence of Heat Treatment Process on Shape Memory Effect in Fe-Mn-Si Alloy[J]. Chinese Journal of Engineering, 1997, 19(1): 105-108. doi: 10.13374/j.issn1001-053x.1997.01.021

Citation:

Wang Sigen, Wang Xu, Hua Lixian, Zhang Jianfu, Yang Yongquan. Influence of Heat Treatment Process on Shape Memory Effect in Fe-Mn-Si Alloy[J]. Chinese Journal of Engineering, 1997, 19(1): 105-108. doi: 10.13374/j.issn1001-053x.1997.01.021

Citation:

PDF( 341 KB)

Influence of Heat Treatment Process on Shape Memory Effect in Fe-Mn-Si Alloy

doi: 10.13374/j.issn1001-053x.1997.01.021

1. Materials Science and Technology School, UST Beijing, Beijing 100083, PRC;
2. Central Iron and Steel Research Institute, Beijing 100081

Received Date: 1996-09-23
Available Online: 2021-08-27

Abstract

Abstract

Influence of heat treatment process on shape memory effect (SME) inFe-28Mn-4Si (adding microelement Magnesium) alloy were studied. The results show thatSME of alloy originates from stress induced γ-ε martensitic transformation and itsreversible transformation, SME can be improved by thermal mechanical training treatmentand solution treatment by strengthening austenitic matrix. When the inside diameter of hotrolled seamless alloy pipes is expended by 5%, the strain recovery ratio will be 45%, andthis strain recovery ratio is enough for pipe joints.
- ferrous shape memory alloy,
- heat treatment process,
- shape memory effect