The Production of the Coating of Stainless Steel by Electrodeposition

Lu Yanping; Wu Jixun; Ye Zhiyuan

doi:10.13374/j.issn1001-053x.1989.02.029

Volume 11 Issue 2

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1989 > 11(2): 162-166

Lu Yanping, Wu Jixun, Ye Zhiyuan. The Production of the Coating of Stainless Steel by Electrodeposition[J]. Chinese Journal of Engineering, 1989, 11(2): 162-166. doi: 10.13374/j.issn1001-053x.1989.02.029

Citation:

Lu Yanping, Wu Jixun, Ye Zhiyuan. The Production of the Coating of Stainless Steel by Electrodeposition[J]. Chinese Journal of Engineering, 1989, 11(2): 162-166. doi: 10.13374/j.issn1001-053x.1989.02.029

Citation:

PDF( 588 KB)

The Production of the Coating of Stainless Steel by Electrodeposition

doi: 10.13374/j.issn1001-053x.1989.02.029

Received Date: 1987-03-06
Available Online: 2021-11-15

Abstract

Abstract

In this paper using electrochemical method the coatings ofFe-Cr-Ni alloy was prepared. The effect of electrodeposition conditions on forming coatings of 304 stainless steel was discussed. The results indicated that when the content of Cr³⁺ and Ni²⁺ in the bath is to a certain ratio, a Fe-Cr-Ni alloy coatings corresponding to the composition 304 stainless steel (18Cr/9Ni) can be obtained at normal atmospheric temperature, lower pH values and proper current.
- electrodeposition,
- stainless steel,
- coating